Shopping Cart
Your Cart is Empty
Quantity:
Subtotal
Taxes
Shipping
Total
There was an error with PayPalClick here to try again
CelebrateThank you for your business!You should be receiving an order confirmation from Paypal shortly.Exit Shopping Cart

Field Gate Hooks & Pins

Selection of Hooks & Pins for various gates and situations.

13 inch Hook to Bolt 19mm Pin

13 inch long hook to bolt with 19mm pin. 

hook to bolt 13 inch galv
£12.95

One 13 inch Hook to Bolt 19mm Pin & One 8 1/2 inch Hook to Drive set

One 13 inch hook to drive and one 8 1/2 inch hook to bolt. 19mm pins.

h2bGh2dG
£21.95

8 1/2 inch Hook to Drive 19mm Pin

8 1/2 inch hook to drive - 19mm pin size

h2dG
£10.95

4 inch by 4 inch Galvanised Hook on Plates - 19mm Pin

4inch by 4 inch plate with 19mm pin - ideal for hanging gates when you don't have access to the back of the post, or you dont want to pressure the post by driving in the standard hooks to drive. Comes with coach screws to install. 

hook on plate 19mm galv
£13.95

One Pair of 4inch by 4 inch Galvanised Hook on Plates - 19mm Pin

One pair of hook on plates - comes with coach screws to install. 

2hop4x4G
£24.95

Two Pairs of 4inch by 4 inch Galvanised Hook on Plates - 19mm Pin

Two pairs of hooks on plates - comes with coach screws to install. 

4hop4x4G
£42.95

4 inch by 4 inch Galvanised Adjustable Hooks on Plates - 19mm Pin

Adjustable hook on plate with 4 inch by 4 inch plate. Ideal for making a gate lift or rise as it opens, or simply curing a warped slamming stile when it locates to the slamming post. 

1hop4x4G
£18.95

One Pair of 4 inch by 4 inch Galvanised Adjustable Hooks on Plates - 19mm Pin

One pair of adjustable hooks on plates.

2hop4x4Gadj
£32.95

Two Pairs of 4 inch by 4 inch Galvanised Adjustable Hooks on Plates - 19mm Pin

Two pairs of hooks on plates, 

4hop4x4Gadj
£59.95

One Adjustable Bottom Eye for 3 inch wide Field Gates - 19mm Pin

Replacement bottom eye for a field or entrance gate. 19mm hole for 19mm pins. Enables you to easily adjust your gate up or down in the future, or make it rise or fall when opening.  As a tip, we usually drill a 22mm hole through the gate stile to prevent pinching when the gate contracts in time. 

adgbeyeG
£20.95
0